US / en
There are few things we dislike more than empty cans or water bottles flying around the boat, so we’ve solved that problem quite nicely with our Waste Band garbage bag holders. Put a bag over the hoop, snap on the bag clips, and clean up that boat! Mounts to gunwales, sidewalls, bait tanks, and consoles with two 4.5” SeaSuckers. Pro tip: attach it to the underside of a deck hatch so it’s ready for use when you open the hatch.
Couldn't load pickup availability
Looking to keep your trash from sliding around the bottom of the boat or tied up in a grocery bag to your steering wheel? Grab any one of our Waste Band options below to secure your trash and keep your boat nice and clean!
Includes 6 round bimini clips. (Four in-use clips plus two spares)
Waste band can accomodate standard garbage bags, 13 gallon kitchen bags, and larger.
- Q: Where are some alternate locations I can put the waste band other than the side of a console?
- A: Don’t even get us started. Gunwales, bait tanks, seat backs, engine covers, and windshields are all fair game. Take it to the next level by mounting it to the underside of a cooler lid or deck hatch. Don’t forget to stick it to the side of your truck when tailgating; nobody likes a messy parking lot. Check out this video on our waste band.
- - Approx. opening of 12” x 7” will accommodate most waste
- - Extends 11” from the surface when mounted
- - Total size: 11" deep, 14.5" wide
- - Manufactured from UV stabilized high-density polyethylene (HDPE)
- - Powered by (2) powerful 120lb pull-strength rated 4.5" vacuum mounts
- - Choose black or white.
Customer Reviews
FAQS
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
No, the HDPE and the raw materials we use to manufacture our vacuum mounts all have a high-performance UV inhibitor built in. Your SeaSucker products should look good for years.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.
OFFICIAL PARTNER TO THE UCI & TEAM JUMBO VISMA
Innovation is the foundation of our company. Our founder, Chuck Casagrande, has invented well over 200 different products to date. Every year SeaSucker works to introduce more and more creative solutions for the athlete or angler on the go.
SeaSucker’s R&D team promise to continue to provide consumers with premium products centered on innovation.
READ MORE READ LESS
WATCH
