US / en
SeaSucker's Camera Mount is a photographer's dream - securely mount a GoPro, DSLR, or anything in between with our powerful 4.5" vacuum mount. Adjustability comes courtesy of a socket arm with a 1/4-20 camera stud on top; just point it where you need it and tighten the socket arm to lock it in place.
Couldn't load pickup availability
SeaSucker knows how important it is to have a reliable mounting system for your camera equipment! Choose from any of our super strong and reliable camera mounts below.
Camera adapter designed to mount DSLR, GoPro, & other cameras
- Q: How strong are the vacuum mounts?
- A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
- Q: How long do the vacuum mounts last before they lose power?
- A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
- Q: Do I need to clean the surface I’m going to attach my SeaSucker to?
- A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
- - 4.5" SeaSucker Low Profile Vacuum Mount with two stainless 1/4-20 inserts in the top and side
- - Socket arm with a 1/4-20 camera stud on top
- - Bracket extends to 5.5" height
Customer Reviews
- HNHiroki N.Verified Buyer9 months agoRated 4 out of 5 starsGreat Suction Cup, but the Camera Arm is Too Weak
The suction cup itself functions exceptionally well and has never detached during a car ride.
However, an orange part fell off, making it difficult to release the air.
Despite this, the attachment and detachment process still works flawlessly. I am quite satisfied with the suction cup's performance.
However, the arm that comes with it is too weak for a DSLR.
The ball joint cannot sustain the weight, forcing me to use an alternative. I use a Fujifilm X-t4, and with the lens, it weighs around 2.8 lbs, but the arm sags under this weight.
I'm currently using it for a GoPro instead.
This product would be even better if it had an arm that matched the high quality of the suction cup.
SSeaSucker9 months agoHi Hiroki,
Please send us a picture of the "orange" piece that fell off. We might want to issue you a replacement.
- JHJENNIFER H.Verified Buyer11 months agoRated 5 out of 5 starsThis thing makes mounting my DSLR to my whiteboard as a webcam SO EASY
A friend recently recommended the SeaSucker when I was complaining about having to rearrange my home office to put my DSLR on a tripod, on a table. This camera mount is genius. It is so easy to apply and I'm 100% confident that it is not going to fall off of the whiteboard (glass shopfront) mounted to my office wall. Makes going "on camera" a quick setup. So much easier!
- GCGil C.Verified Buyer3 months agoRated 5 out of 5 starsCamera Mount
It does what it says! Strong grip and totally functional.
Gabe me what I bought it for. Industrial strength and build.
- SMStanley M.Verified Buyer3 months agoRated 5 out of 5 starsCamera mount
We ordered this to hold our Nebula Solar projector to the ceiling of our squaredrop trailer when we go camping. Have yet to use it out for that purpose, but was definitely impressed on the quality of the product.
I have used other suction cup mounts before, but the Sea Sucker cup is a lot more robust and the handy vacuum pump is a great idea.
- JGJim G.Verified Buyer1 year agoRated 5 out of 5 starsGreat camera mount
The best thing about this item is the fact that I can feel secure that it will hold my pricy camera in place. I use several SeaSucker products on my boat and they have never failed me.
OFFICIAL PARTNER TO THE UCI & TEAM JUMBO VISMA
Innovation is the foundation of our company. Our founder, Chuck Casagrande, has invented well over 200 different products to date. Every year SeaSucker works to introduce more and more creative solutions for the athlete or angler on the go.
SeaSucker’s R&D team promise to continue to provide consumers with premium products centered on innovation.
READ MORE READ LESS
WATCH
